Skip to content
+

Migration from v5 to v6

This guide describes the changes needed to migrate the Date and Time Pickers from v5 to v6.

Introduction

To get started, check out the blog post about the release of MUI X v6.

Start using the new release

In package.json, change the version of the date pickers package to latest or ^6.0.0.

-"@mui/x-date-pickers": "5.X.X",
+"@mui/x-date-pickers": "^6.0.0",

Since v6 is a major release, it contains changes that affect the public API. These changes were done for consistency, improved stability and to make room for new features. Described below are the steps needed to migrate from v5 to v6.

Run codemods

The preset-safe codemod will automatically adjust the bulk of your code to account for breaking changes in v6. You can run v6.0.0/pickers/preset-safe targeting only Date and Time Pickers or v6.0.0/preset-safe to target Data Grid as well.

You can either run it on a specific file, folder, or your entire codebase when choosing the <path> argument.

// Date and Time Pickers specific
npx @mui/x-codemod v6.0.0/pickers/preset-safe <path>
// Target Data Grid as well
npx @mui/x-codemod v6.0.0/preset-safe <path>

Breaking changes that are handled by this codemod are denoted by a ✅ emoji in the table of contents on the right side of the screen.

If you have already applied the v6.0.0/pickers/preset-safe (or v6.0.0/preset-safe) codemod, then you should not need to take any further action on these items.

All other changes must be handled manually.

Picker components

✅ Rename the inputFormat prop

The inputFormat prop has been renamed to format on all the pickers components.

 <DatePicker
-  inputFormat="YYYY"
+  format="YYYY"
 />

Update expected values in tests

The value rendered in the input might have been modified. If you are using RTL or if your date contains single digits sections, non-ASCII characters will be added.

If your tests are relying on the input values, you can clean them with the following method.

export const cleanString = (dirtyString: string) =>
  dirtyString
    .replace(/[\u2066\u2067\u2068\u2069]/g, '') // Remove non-ASCII characters
    .replace(/ \/ /g, '/'); // Remove extra spaces

Update the format of the value prop

Previously, it was possible to provide any format that your date management library was able to parse. For instance, you could pass value={new Date()} when using AdapterDayjs. This behavior brought a lot of confusion.

In v6, the format expected by the value prop is the same as for any other prop holding a date. Here is the syntax to initialize a date picker at the current date for each adapter:

// Date-fns
<DatePicker value={new Date()} />;

// Dayjs
import dayjs from 'dayjs';
<DatePicker value={dayjs()} />;

// Moment
import moment from 'moment';
<DatePicker value={moment()} />;

// Luxon
import { DateTime } from 'luxon';
<DatePicker value={DateTime.now()} />;

Stop rendering a clock on desktop

In desktop mode, the DateTimePicker and TimePicker components will no longer render the TimeClock component. The TimeClock component has been replaced with a new DigitalClock component instead. The behavior on Mobile and Static variants is still the same. If you were relying on Clock Picker in desktop mode for tests—make sure to check testing caveats to choose the best replacement for it.

You can manually re-enable the previous clock component using the new viewRenderers prop. The code below enables the TimeClock UI on all the DesktopTimePicker and DesktopDateTimePicker in your application.

Take a look at the default props via theme documentation for more information.

const theme = createTheme({
  components: {
    MuiDesktopTimePicker: {
      defaultProps: {
        viewRenderers: {
          hours: renderTimeViewClock,
          minutes: renderTimeViewClock,
          seconds: renderTimeViewClock,
        },
      },
    },
    MuiDesktopDateTimePicker: {
      defaultProps: {
        viewRenderers: {
          hours: renderTimeViewClock,
          minutes: renderTimeViewClock,
          seconds: renderTimeViewClock,
        },
      },
    },
  },
});

Remove the keyboard view

The picker components no longer have a keyboard view to render the input inside the modal on mobile.

  • If your date is easier to edit with the keyboard (e.g: a birthdate), you can directly use the new field components:

     function App() {
       return (
    -    <DatePicker />
    +    <DateField />
       )
     }
    
  • If you want to keep the old keyboard view, you can pass a custom Layout component slot to re-introduce the keyboard view.

✅ Rename or refactor shouldDisableTime prop

The shouldDisableTime prop signature has been changed. Previously it did receive value as a number of hours, minutes, or seconds. Now it will receive the date object (based on the used adapter). This will allow more powerful usage and will be compatible with the future digital time selection view.

Either rename the prop to the newly added, but deprecated shouldDisableClock or refactor usage to account for the change in prop type. The codemod will take care of renaming the prop to keep the existing functionality but feel free to update to the new shouldDisableTime prop on your own.

 // ℹ️ Rename and keep using the deprecated prop
 // This is the change that the codemod will apply
 <DateTimePicker
-  shouldDisableTime={(timeValue, view) => view === 'hours' && timeValue < 12}
+  shouldDisableClock={(timeValue, view) => view === 'hours' && timeValue < 12}
 />

 // ✅ Update your code to use the provided date value parameter instead of a number
 <DateTimePicker
-  shouldDisableTime={(timeValue, view) => view === 'hours' && timeValue < 12}
+  shouldDisableTime={(value, view) => view === 'hours' && value.hour() < 12}
 />

Change the DOM structure

  • The internal CalendarOrClockPicker component has been removed and all its element have been moved to the new Layout component slot.

    The DOM node containing the toolbar and the view content (the root slot of the CalendarOrClockPicker component) no longer exists. The closest equivalent is now the contentWrapper slot of the PickersLayout component, which do not contain the toolbar. If you need a DOM node containing the toolbar and the view content, you will have to pass a custom Layout component slot.

     const theme = createTheme({
       components: {
    -    MuiCalendarOrClockPicker: {
    +    MuiPickersLayout: {
           styleOverrides: {
    -        root: {
    +        contentWrapper: {
               backgroundColor: 'red',
             },
           },
         },
       },
     });
    
  • The internal PickerStaticWrapper component has been removed and all its element have been moved to the new Layout component slot.

     const theme = createTheme({
       components: {
    -    MuiPickerStaticWrapper: {
    +    MuiPickersLayout: {
           styleOverrides: {
             root: {
               opacity: 0.5,
             },
           },
         },
       },
     });
    

    The DOM node containing the toolbar and the view content (the content slot of the PickerStaticWrapper component) no longer exists. The closest equivalent is now the contentWrapper slot of the PickersLayout component, which do not contain the toolbar. If you need a DOM node containing the toolbar and the view content, you will have to pass a custom Layout component slot.

     const theme = createTheme({
       components: {
    -    MuiPickerStaticWrapper: {
    +    MuiPickersLayout: {
           styleOverrides: {
    -        content: {
    +        contentWrapper: {
               opacity: 0.5,
             },
           },
         },
       },
     });
    

Date library and adapters

✅ Do not import adapter from @date-io

In v5, it was possible to import adapters either from either @date-io or @mui/x-date-pickers which were the same. In v6, the adapters are extended by @mui/x-date-pickers to support fields components. Which means adapters can not be imported from @date-io anymore. They need to be imported from @mui/x-date-pickers or @mui/x-date-pickers-pro. Otherwise, some methods will be missing. If you do not find the adapter you were using—there probably was a reason for it, but you can raise an issue expressing interest in it.

-import AdapterJalaali from '@date-io/jalaali';
+import { AdapterMomentJalaali } from '@mui/x-date-pickers/AdapterMomentJalaali';

Increase Luxon minimal version

The v6 AdapterLuxon now requires luxon version 3.0.2 or higher in order to work.

Take a look at the Upgrading Luxon guide if you are using an older version.

View components

✅ Rename components

The view components allowing to pick a time, a date or parts of a date without an input have been renamed to better fit their usage:

-<CalendarPicker {...props} />
+<DateCalendar {...props} />

-<DayPicker {...props} />
+<DayCalendar {...props} />

-<CalendarPickerSkeleton {...props} />
+<DayCalendarSkeleton {...props} />

-<MonthPicker {...props} />
+<MonthCalendar {...props} />

-<YearPicker {...props} />
+<YearCalendar {...props} />

-<ClockPicker {...props} />
+<TimeClock {...props} />

Component names in the theme have changed as well:

-MuiCalendarPicker: {
+MuiDateCalendar: {

-MuiDayPicker: {
+MuiDayCalendar: {

-MuiCalendarPickerSkeleton: {
+MuiDayCalendarSkeleton: {

-MuiMonthPicker: {
+MuiMonthCalendar: {

-MuiYearPicker: {
+MuiYearCalendar: {

-MuiClockPicker: {
+MuiTimeClock: {

✅ Rename date prop to value

The date prop has been renamed to value on MonthCalendar, YearCalendar, TimeClock, and DateCalendar (components renamed in previous section):

-<MonthPicker date={dayjs()} />
+<MonthCalendar value={dayjs()} />

-<YearPicker date={dayjs()} />
+<YearCalendar value={dayjs()} />

-<ClockPicker date={dayjs()} />
+<TimeClock value={dayjs()} />

-<CalendarPicker date={dayjs()} />
+<DateCalendar value={dayjs()} />

Use the 12h/24h format from the locale as the default value of the ampm prop on TimeClock

The default value of the ampm prop changed from false to utils.is12HourCycleInCurrentLocale(). It means that the TimeClock component will use a 12h time format for locales where the time is usually displayed with a 12h format.

If you want to keep the previous behavior, you just have to set the ampm prop to false (components renamed in previous section):

- <ClockPicker />
+ <TimeClock ampm={false} />

Stop using the responsive classes on PickersMonth and PickersYear

The modeMobile and modeDesktop classes have been removed from the PickersMonth and PickersYear internal components.

If you were using those classes on responsive components, you can import DEFAULT_DESKTOP_MODE_MEDIA_QUERY from @mui/x-date-pickers or @mui/x-date-pickers-pro (or use your custom media query if any):

 <GlobalStyles
   styles={{
-    [`.${pickersYearClasses.modeDesktop}`]: {
-      backgroundColor: 'red'
-    }
+    [DEFAULT_DESKTOP_MODE_MEDIA_QUERY]: {
+      [`.${pickersYearClasses.root}`]: {
+        backgroundColor: 'red'
+      }
+    }

-    [`.${pickersYearClasses.modeMobile}`]: {
-      backgroundColor: 'red'
-    }
+    [DEFAULT_DESKTOP_MODE_MEDIA_QUERY.replace('@media', '@media not')]: {
+      [`.${pickersYearClasses.root}`]: {
+        backgroundColor: 'red'
+      }
+    }
   }}
 />

Localization

✅ Rename localization props

The props used to set the text displayed in the pickers have been replaced by keys inside the localeText prop:

Removed prop Property in the new localText prop
endText end
getClockLabelText clockLabelText
getHoursClockNumberText hoursClockNumberText
getMinutesClockNumberText minutesClockNumberText
getSecondsClockNumberText secondsClockNumberText
getViewSwitchingButtonText calendarViewSwitchingButtonAriaLabel
leftArrowButtonText openPreviousView (or previousMonth when the button changes the visible month)
rightArrowButtonText openNextView (or nextMonth when the button changes the visible month)
startText start
getOpenDialogAriaText openDatePickerDialogue /(or openTimePickerDialogue for time pickers)

For instance if you want to replace the startText / endText

 <DateRangePicker
-  startText="From"
-  endText="To"
+  localeText={{
+    start: 'From',
+    end: 'To',
+  }}
 />

✅ Rename locale prop on LocalizationProvider

The locale prop of the LocalizationProvider component have been renamed adapterLocale:

 <LocalizationProvider
   dateAdapter={AdapterDayjs}
-  locale="fr"
+  adapterLocale="fr"
 >
   {children}
 </LocalizationProvider

Component slots / component slot props

All the props used to pass props to parts of the UI (e.g: pass a prop to the input) have been replaced by component slot props. All the props used to override parts of the UI (e.g: pass a custom day renderer) have been replaced by component slots.

You can find more information about this pattern in the Base UI documentation.

These changes apply to all the components that had the prop. For example, the ToolbarComponent has been replaced by a Toolbar component slot on all pickers.

Input renderer (required in v5)

  • The renderInput has been replaced by an input component slot props:

     <DatePicker
    -  renderInput={(inputProps) => <TextField {...props} variant="outlined" />}
    +  slotProps={{ textField: { variant: 'outlined' } }}
     />
    
     <DateRangePicker
    -  renderInput={(startProps, endProps) => (
    -    <React.Fragment>
    -      <TextField {...startProps} variant="outlined" />
    -      <Box sx={{ mx: 2 }}> - </Box>
    -      <TextField {...endProps} variant="outlined" />
    -    </React.Fragment>
    -  )}
    +  slotProps={{ textField: { variant: 'outlined' } }}
     />
    
  • The Date Range Picker also have a new fieldSeparator component slot and component slot props to customize only this part of the UI:

     <DateRangePicker
    -  renderInput={(startProps, endProps) => (
    -    <React.Fragment>
    -      <TextField {...startProps} />
    -      <Box sx={{ mx: 2 }}> to </Box>
    -      <TextField {...endProps} />
    -    </React.Fragment>
    -  )}
    +  slotProps={{ fieldSeparator: { children: 'to' } }}
     />
    

Toolbar (ToolbarComponent)

  • ✅ The ToolbarComponent has been replaced by a toolbar component slot:

     <DatePicker
    -  ToolbarComponent={MyToolbar}
    +  slots={{ toolbar: MyToolbar }}
     />
    
  • ✅ The toolbarPlaceholder, toolbarFormat, and showToolbar props have been moved to the toolbar component slot props:

     <DatePicker
    -  toolbarPlaceholder="__"
    -  toolbarFormat="DD / MM / YYYY"
    -  showToolbar
    +  slotProps={{
    +    toolbar: {
    +      toolbarPlaceholder: '__',
    +      toolbarFormat: 'DD / MM / YYYY',
    +      hidden: false,
    +    }
    +  }}
     />
    
  • ✅ The toolbarTitle prop has been moved to the localization object:

     <DatePicker
    -  toolbarTitle="Title"
    +  localeText={{ toolbarTitle: 'Title' }}
     />
    
  • ✅ The toolbar related translation keys have been renamed to better fit their usage:

     <LocalizationProvider
       localeText={{
    -    datePickerDefaultToolbarTitle: 'Date Picker',
    +    datePickerToolbarTitle: 'Date Picker',
    
    -    timePickerDefaultToolbarTitle: 'Time Picker',
    +    timePickerToolbarTitle: 'Time Picker',
    
    -    dateTimePickerDefaultToolbarTitle: 'Date Time Picker',
    +    dateTimePickerToolbarTitle: 'Date Time Picker',
    
    -    dateRangePickerDefaultToolbarTitle: 'Date Range Picker',
    +    dateRangePickerToolbarTitle: 'Date Range Picker',
       }}
     />
    
  • The onChange / openView props on the toolbar have been renamed to onViewChange / view.

     const CustomToolbarComponent = props => (
       <div>
    -    <button onChange={() => props.onChange('day')}>Show day view</button>
    +    <button onClick={() => props.onViewChange('day')}>Show day view</button>
    -    <div>Current view: {props.openView}</div>
    +    <div>Current view: {props.view}</div>
       </div>
     )
    
     <DatePicker
    -  ToolbarComponent={CustomToolbarComponent}
    +  slots={{
    +    toolbar: CustomToolbarComponent
    +  }}
     />
    
  • The currentlySelectingRangeEnd / setCurrentlySelectingRangeEnd props on the Date Range Picker toolbar have been renamed to rangePosition / onRangePositionChange.

     const CustomToolbarComponent = props => (
       <div>
    -    <button onChange={() => props.setCurrentlySelectingRangeEnd('end')}>Edit end date</button>
    +    <button onClick={() => props.onRangePositionChange('end')}>Edit end date</button>
    -    <div>Is editing end date: {props.currentlySelectingRangeEnd === 'end'}</div>
    +    <div>Is editing end date: {props.rangePosition === 'end'}</div>
       </div>
     )
     <DateRangePicker
    -  ToolbarComponent={CustomToolbarComponent}
    +  slots={{
    +    toolbar: CustomToolbarComponent
    +  }}
     />
    

Tabs

  • ✅ The hideTabs and timeIcon props have been moved to tabs component slot props. The dateRangeIcon prop has been renamed to dateIcon and moved to tabs component slot props:

     <DateTimePicker
    -  hideTabs={false}
    -  dateRangeIcon={<LightModeIcon />}
    -  timeIcon={<AcUnitIcon />}
    +  slotProps={{
    +    tabs: {
    +      hidden: false,
    +      dateIcon: <LightModeIcon />,
    +      timeIcon: <AcUnitIcon />,
    +    }
    +  }}
     />
    
  • The onChange prop on DateTimePickerTabs component has been renamed to onViewChange to better fit its usage:

     <DateTimePickerTabs
    -  onChange={() => {}}
    +  onViewChange={() => {}}
     />
    
     const CustomTabsComponent = props => (
       <div>
    -    <button onClick={() => props.onChange('day')}>Show day view</button>
    +    <button onClick={() => props.onViewChange('day')}>Show day view</button>
       </div>
     )
     <DateTimePicker
       slots={{
         tabs: CustomTabsComponent
       }}
     />
    

Action bar

  • The actions prop of the actionBar component slot can no longer receive a callback. Instead, you can pass a callback at the component slot props level

     <DatePicker
    -  componentsProps={{
    -     actionBar: {
    -       actions: (variant) => (variant === 'desktop' ? [] : ['clear']),
    -     },
    -  }}
    +  componentsProps={{
    +     actionBar: ({ wrapperVariant }) => ({
    +       actions: wrapperVariant === 'desktop' ? [] : ['clear'],
    +     }),
    +  }}
       // or using the new `slots` prop
    +  slotProps={{
    +     actionBar: ({ wrapperVariant }) => ({
    +       actions: wrapperVariant === 'desktop' ? [] : ['clear'],
    +     }),
    +  }}
     />
    

Day (renderDay)

  • The renderDay prop has been replaced by a day component slot:

     <DatePicker
    -  renderDay={(_, dayProps) => <CustomDay {...dayProps} />}
    +  slots={{ day: CustomDay }}
     />
    
  • The Day component slot no longer receives a selectedDays prop. If you need to access it, you can control the value and pass it to the component slot props:

    function CustomDay({ selectedDay, ...other }) {
      // do something with 'selectedDay'
      return <PickersDay {...other} />;
    }
    
    function App() {
      const [value, setValue] = React.useState(null);
    
      return (
        <DatePicker
          value={value}
          onChange={(newValue) => setValue(newValue)}
          slots={{ day: CustomDay }}
          slotProps={{
            day: { selectedDay: value },
          }}
        />
      );
    }
    

✅ Popper (PopperProps)

  • The PopperProps prop has been replaced by a popper component slot props:

     <DatePicker
    -  PopperProps={{ onClick: handleClick }}
    +  slotProps={{ popper: { onClick: handleClick } }}
     />
    

✅ Desktop transition (TransitionComponent)

  • The TransitionComponent prop has been replaced by a desktopTransition component slot:

     <DatePicker
    -  TransitionComponent={Fade}
    +  slots={{ desktopTransition: Fade }}
     />
    

✅ Dialog (DialogProps)

  • The DialogProps prop has been replaced by a dialog component slot props:

     <DatePicker
    -  DialogProps={{ backgroundColor: 'red' }}
    +  slotProps={{ dialog: { backgroundColor: 'red' }}}
     />
    

✅ Desktop paper (PaperProps)

  • The PaperProps prop has been replaced by a desktopPaper component slot props:

     <DatePicker
    -  PaperProps={{ backgroundColor: 'red' }}
    +  slotProps={{ desktopPaper: { backgroundColor: 'red' } }}
     />
    

✅ Desktop TrapFocus (TrapFocusProp)

  • The TrapFocusProps prop has been replaced by a desktopTrapFocus component slot props:

     <DatePicker
    -  TrapFocusProps={{ isEnabled: () => false }}
    +  slotProps={{ desktopTrapFocus: { isEnabled: () => false } }}
     />
    

Paper Content

  • The PaperContent / paperContent component slot and component slot props have been removed.

    You can use the new Layout component slot. The main difference is that you now receive the various parts of the UI instead of a single children prop:

    +import { usePickerLayout } from '@mui/x-date-pickers/PickersLayout';
    
     function MyCustomLayout(props) {
    -  const { children } = props;
    -
    -  return (
    -    <React.Fragment>
    -      {children}
    -      <div>Custom component</div>
    -    </React.Fragment>
    -  );
    +  const { toolbar, tabs, content, actionBar} = usePickerLayout(props);
    +
    +  return (
    +    <PickersLayoutRoot>
    +      {toolbar}
    +      {content}
    +      {actionBar}
    +      <div>Custom component</div>
    +    </PickersLayoutRoot>
    +  );
     }
    
     function App() {
       return (
         <DatePicker
    -       components={{
    -         PaperContent: MyCustomLayout,
    -       }}
    +       components={{
    +         Layout: MyCustomLayout,
    +       }}
            // or using the new `slots` prop
    +       slots={{
    +         layout: MyCustomLayout,
    +       }}
         />
       );
     }
    

✅ Left arrow button

  • The component slot LeftArrowButton has been renamed to PreviousIconButton:

     <DatePicker
    -  components={{
    -    LeftArrowButton: CustomButton,
    -  }}
    +  components={{
    +    PreviousIconButton: CustomButton,
    +  }}
       // or using the new `slots` prop
    +  slots={{
    +    previousIconButton: CustomButton,
    +  }}
    
    -  componentsProps={{
    -    leftArrowButton: {},
    -  }}
    +  componentsProps={{
    +    previousIconButton: {},
    +  }}
       // or using the new `slotProps` prop
    +  slotProps={{
    +    previousIconButton: {},
    +  }}
     />
    

✅ Right arrow button

  • The component slot RightArrowButton has been renamed to NextIconButton:

     <DatePicker
    -  components={{
    -    RightArrowButton: CustomButton,
    -  }}
    +  components={{
    +    NextIconButton: CustomButton,
    +  }}
       // or using the new `slots` prop
    +  slots={{
    +    nextIconButton: CustomButton,
    +  }}
    
    -  componentsProps={{
    -    rightArrowButton: {},
    -  }}
    +  componentsProps={{
    +    nextIconButton: {},
    +  }}
       // or using the new `slotProps` prop
    +  slotProps={{
    +    nextIconButton: {},
    +  }}
     />
    

✅ Input

  • The InputProps prop has been removed. You can use the InputProps of the textField component slot props instead:

     <DatePicker
    -  InputProps={{ color: 'primary' }}
    +  slotProps={{ textField: { InputProps: { color: 'primary' } } }}
     />
    

✅ Input adornment

  • The InputAdornmentProps prop has been replaced by an inputAdornment component slot props:

     <DatePicker
    -  InputAdornmentProps={{ position: 'start' }}
    +  slotProps={{ inputAdornment: { position: 'start' } }}
     />
    

✅ Open Picker Button

  • The OpenPickerButtonProps prop has been replaced by an openPickerButton component slot props:

     <DatePicker
    -  OpenPickerButtonProps={{ ref: buttonRef }}
    +  slotProps={{ openPickerButton: { ref: buttonRef } }}
     />
    

Rename remaining private components

The four components prefixed with Private are now stable. These components were renamed:

  • PrivatePickersMonth -> MuiPickersMonth
  • PrivatePickersSlideTransition -> MuiPickersSlideTransition
  • PrivatePickersToolbarText -> MuiPickersToolbarText
  • PrivatePickersYear -> MuiPickersYear

Manual style overriding will need to use updated classes:

-.PrivatePickersMonth-root {
+.MuiPickersMonth-root {

-.PrivatePickersSlideTransition-root {
+.MuiPickersSlideTransition-root {

-.PrivatePickersToolbarText-root {
+.MuiPickersToolbarText-root {

-.PrivatePickersYear-root {
+.MuiPickersYear-root {

Component name changes are also reflected in themeAugmentation:

 const theme = createTheme({
   components: {
-    PrivatePickersMonth: {
+    MuiPickersMonth: {
       // overrides
     },
-    PrivatePickersSlideTransition: {
+    MuiPickersSlideTransition: {
       // overrides
     },
-    PrivatePickersToolbarText: {
+    MuiPickersToolbarText: {
       // overrides
     },
-    PrivatePickersYear: {
+    MuiPickersYear: {
       // overrides
     },
   },
 });

Behavior of field onChange props

Since the masked input has been replaced by fields the input value is valid most of the time.

In v5, the user had to delete a character and type in another character to update the date resulting in onChange being called twice. Firstly with deleted character, and then with the complete date again.

In v6, user can override the field section, so onChange is called at nearly every key pressed.

If you were relying on onChange to send server requests, you might be interested in debouncing it to avoid sending too many requests. To do so please refer to the corresponding docs example.

Rename components to slots (optional)

The components and componentsProps props are being renamed to slots and slotProps props respectively. This is a slow and ongoing effort between the different MUI libraries. To smooth the transition, pickers support both the components props which are deprecated, and the new slots props.

If you would like to use the new API and do not want to see deprecated prop usage, consider running rename-components-to-slots codemod handling the prop renaming.

npx @mui/x-codemod v6.0.0/pickers/rename-components-to-slots <path>

Take a look at the RFC for more information.